This brake proportioning valve has a 9/16"-18 connection for Rear Brakes & Dual 3/8"-24 ports for the front brakes.
The connections from the Master Cylinder are 1/2"-20 and 7/16"-24.
We supply a pigtail for the prop valve wire sensor and
a plug for 4x4 applications to cap one of the front ports.
You will need a brake line reducers for some brake line fittings. Brake line reducers or adapters are available at many local auto part store or online at www.brakeconnect.com.
Search for tread changers.
The new valve has the same mounting holes as the original valve.
For trucks that have the dual wire brake switch, wire both wires to the single supplied pigtail.
A prop valve bleeding tool is in the related items below.
This valve comes with a 1 year warranty.
If you drive a 1980-1986 Ford F250/F350 Trucks from model years 1980-1986, then this is the correct brake proportioning valve for your front disc and rear drum brakes.
Fits the following Ford models:
This part is designed to fit the following vehicles.Ford - F-250 - 1980
Average Not yet rated
Write an online review and share your thoughts with others.