Use our Brake Proportion Valve Bleeding Tool when bleeding your brakes to lock the prop valve in place and keep the valve from tripping. Simply remove the warning light switch (white plug) on the valve, then screw in this tool while bleeding your brakes. After the bleeding process is finished replace the warning light switch. This item makes bleeding your brake system much easier. Works with all our non adjustable valves.
Works as a combination valve bleeding tool as well.
worked as described, difficult to install and remove because of design.
Review by Rob from , on 9/19/2018
tool ordered with valve not included in order, I requested one, they sent it out very quickly, thx. Product works, thx be sure to remove tool after bleeding brakes or rear brakes will be locked up.
Review by Joe from , on 4/30/2018
too expensive but got the job done.
Combination valve 86 gmc dually.
Review by Mark Ascenzo from , on 4/16/2018
Worked and fit perfectly.
Review by Ricky Godfrey from , on 9/4/2017
This bleeder worked great on the on the proportioning valve no trouble at all to bleed the rear brakes the rear brakes
Brake Bleeding Tool
Review by B. Booher from , on 8/15/2017
Very helpful in bleeding brakes after replacing proportional valve on truck.
A Must Have!
Review by Jack from , on 4/12/2017
This little tool is the key to bleeding your brakes swiftly and without grief!
Review by BRIAN from FITCHBURG, MA on 9/14/2016
SO SIMPLE BUT REALLY MADE A DIFFERENCE IN BLEEDING THE SYSTEM, GLAD I GOT IT
Review by Martin from Rockville, Md on 1/10/2016
Used this tool when bleeding the disc/drum proportioning valve. At first wasn't sure that the plastic tip was strong enough to keep the metering valve centered, but it did. Definitely saved time over having to center the valve the "old fashioned way".