Description
DBK9LXB- Ford & 9" Rear End Disc Brake Kit w/ E-brake Standard Rotors & Standard Calipers
- Rear Single Piston Calipers W/ E-Brake Option
- D154 Pads Included
- Stainless Steel Brake Hoses
- Caliper Brackets
- E-Brake Cables
- Mounting Hardware
- E-Brake Rear Loaded Calipers
- Brackets & Flanges to fit:
- 3-3/8” x 2”
- 3-1/2” x 2-3/8”
- 3-9/19” x 2”
- Drilled/ Slotted Rotors
- Drilled 5x4.5" for 1/2" Studs
- Drilled 5x4.75" for 7/16 Studs
The DBK9 provides an easy to install, bolt on solution for upgrading your pre-1980 Ford passenger car 9” rear-end to disc brake performance. ’s kit is unique in that it provides all the brackets and flanges that fit the three most popular sizes of the 9” & rear end (3-3/8” x 2”, 3-1/2” x 2-3/8”, 3-9/19” x 2” ). This eliminates all guesswork when purchasing and installing the kit. The DBK9 comes in both standard and high performance models. The high performance LX kits upgrade to cross-drilled and slotted rotors and stainless steel braided brake lines.
Specification:
- Part Number: DBK9
- UPC: 635648180519
- Position: Rear
- Application Type: Disc/Disc
- Disc Brak Kit Type: Manual
- Minimum Order: 1
- Application Specific: Yes
- Application Flags: Does not fit S-10 Chasis or truck frames or 14" rims. Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer. 2.786" max register axle.
- Country of Origin: China
- Safety Material: None
- Front Rotor Included: No
- Rear Rotor Included: Yes
- Bolt Pattern: 5x4.5 &5x4.75
- Rotor Construction: Vented
- Rotor Dimension: 11"
- Rotor Thickness: 1"
- Front Caliper Included: No
- Rear Caliper Included: Yes
- Rear Caliper Material: Cast Iron
- Rear Caliper Finish: Natural
- Rear Caliper Piston: Single Large Bore
- Brake Pad Replacement: MKD54
- Parking Brake Provision: Yes
- Parking Brake Cables Included: Yes
- Parking Brake Cable Length: (2) 38"
- Minimum required wheel diameter: 15"
- Front Spindles Included: No
- Brake Booster Included: No
- Master Cylinder Included: No
- Brake Hoses Included: Yes
- Brake Hose Material: Rubber
- Master Cylinder Included: N/A
- Brake Booster Included: N/A
- Application Notes: Fits small bearing rear ends (3-3/8 x 2, 3-1/2 x 2-3/8, 3-9/19 x 2 ) The Vented Rotors in the 9inch kit are 11.5" and have a Center Opening (register) of 2.78". The rotors are drilled for both the Ford 5 on 4.5 using 1/2" studs or GM 5 on 4.75
- Box Size: No
- Weight: No
- Brake Booster Included: Yes
- Master Cylinder Included: Rubber
- Brake Hoses Included: N/A
- Brake Hose Material: N/A
- Application Notes: Fits small bearing rear ends (3-3/8 x 2, 3-1/2 x 2-3/8, 3-9/19 x 2 ) The Vented Rotors in the 9inch kit are 11.5" and have a Center Opening (register) of 2.78". The rotors are drilled for both the Ford 5 on 4.5 using 1/2" studs or GM 5 on 4.75
- MKT: MBM's easy to install rear disc brake kit includes everything you need for an easy restoration! Remember that you will need to swap ot your proportioning valve to disc/disc and MBM reccomends a 1"-1/8 large bore master cylinder when adding disc brake
- Box Size: 15x15x14
- Weight: 62