Description
Mopar A Body Disc Brake Wheel Kit Includes:
-
11" Standard Rotors with 5x4 Bolt Pattern
-
Loaded Large Calipers
-
Backing Plates
-
Stock Height Spindles
-
7/16 Rubber Brake Hoses
-
Bearings/ Seals / Dust Caps & all Hardware
-
Lower Ball Joint & Steering Arm Replacements
Brake Booster Conversion Kit
-
7" Single Black Brake Booster
-
Black firewall bracket & linkage
-
Cast Iron Master Cylinder
-
Adjustable Proportioning Valve w/ 3/8 fittings
-
Vacuum hose & fittings
Our BRAND NEW Dodge A body disc brake kit REDESIGN Features all new parts that does NOT require you to change out your control arms Saves your customer 25% or more. New Re-Design gives you a bolt on drum to disc conversion with all new lower ball joints!
** NOTE***
- Depending on what has been done to your engine over the years you may need to move the windshield washer fluid tank and re route those lines.
- The stock air filter that came with the v6 engines is a haus and you may need to convert to an aftermarket air cleaner to be able to get the clearance you need to install the kit.
- The booster conversion kit is not OE style and is an after market product.
- The brake line tube nuts will not automatically screw in to the master cylinder and adapters will be needed. Our suggestion is to splice in a jumper line from the old location of the manual master cylinder on the firewall and run the lines the 15.5" inches you need to make it to the master.
- If you have a larger battery than what came stock with your car the unit may be 1" too long and may need to get a smaller battery to get the unit to fit.