Description
Complete Stock Height Disc Brake Kit Includes
- 11" Rotors
- Large Slider Type Kelsey Hayes Calipers
- Pads (MKD84 Pads)
- Backing Plates
- Stock Height Spindles
- Rubber Hoses
- Bearings, Seals, Dust Caps, Spindle Nuts, Spindle Washers, all Hardware
- Lower ball joint steering arm assembly
- Upper ball joint adapters
- Expect 1/4" at least to push the wheels toward the fender well
***Note: Please make sure of your bolt pattern. This kit fits the 5x4.5 bolt pattern only.
Fits original 14" rims except Steely Rims, Cragar Steel SST Rims, Year One Rally, or any drum 14" rim that had smaller than 10" drums.
By installing this kit you do not have to relace the upper control arms like other kits on the market. Kit includes adapters to make the smaller upper ball joint to fit ths spindles included.
| Mopar Body Style Chart | ||
| Body Series | Make | Mopar Model |
| A-Body | Dodge | 61 Lancer 63-76 Dart 71-72 Demon |
| Plymouth | 60-76 Valiant 67-69 Barracuda 70-76 Duster 71-76 Scamp | |
Specification:
- Part Number: DBK6272A-45
- Position: Front
- Applicaiton Type: Disc/ Drum
- Minimum Order: 1
- Application Specific: Yes
- Application Flags: 14" Rims or larger
- Country Of Orgin: China
- Safety Materal: No
- Front Rotor Included: Yes
- Rear Rotor Included: No
- Rotor Construction: Vented
- Rotor Dimension: 11
- Front Caliper Included: Yes
- Rear Caliper Included: No
- Front Caliper Material: Cast Iron
- Rear Caliper Material: N/A
- Front Caliper Finish: Natural
- Rear Caliper Finish: N/A
- Parking Brake Provision: N/A
- Parking Brake Cables Included: N/A
- Minimum Required Wheel Diameter: 14"
- Front Spindles Included: Yes
- Brake Booster Included: No
- Brake Booster Type: N/A
- Brake Booster Size: N/A
- Brake Booster Material: N/A
- Brake Booster Finish: N/A
- Master Cylinder Included: No
- Master cylinder Finish: N/A
- Master Cylinder Type: N/A
- Master cylinder Port Sizes: N/A
- Proportioning Valve Port Sizes: N/A
- Built In Residuals: N/A
- Master cylinder Bore Size: N/A
- Brake Hoses Included: Yes
- Brake Hose Material: Rubber
- Application Notes: Kit includes lower ball joint/ steering arm. You do not have to change out the upper control arms to install the kit. Will work with 14" rims with back spacing greater than 3.5" Works with large bolt pattern only.
- Box Size: 15x15x14
- Weight Lbs: 120