Description
Full Size Chevy 1959-1964 Complete Stock Height Front & Rear Disc Brake Kit Includes
- 11" Drilled & Slotted Rotors
- Large Single Bore GM Calipers w/ Pads
- Caliper Brackets
- Hoses with Banjo Bolts
- Bearings
- Seals
- Dust Caps
- Spindle Nuts
- Spindle Washers
- all Hardware
1959-1964 GM Full Size 8" Dual Zinc Booster Conversion Kit (Impala, Bel Air, Biscayne)
Includes:
- 1" Bore Dual Bail Cast Iron Master Cylinder
- Brass Proportioning Valve Kit for Left Mount
- 8" Dual Zinc Booster w/ Firewall Brackets
- Pedal Extension & Clevis
Specification:
- Part Number: DBK59641012FSLX-GMFS2-211
- Position: Front & Rear
- Applicaiton Type: Disc/Drum
- Disc Brake Kit Type: Power
- Minimum Order: 1
- Application Specific: Yes
- Application Flags: Uses original Drum Spindle
- Country Of Orgin: China
- Safety Materal: None
- Front Rotor Included: Yes
- Rear Rotor Included: No
- Rotor Construction: Drilled & Slotted
- Rotor Dimension: 11.0 in.
- Rotor Thickness: 1.0 in.
- Front Caliper Included: Yes
- Rear Caliper Included: No
- Front Caliper Material: Cast Iron
- Front Caliper Finish: Natural
- Front Caliper Piston: Single Large Piston
- Front Pad Replacement: MKD52
- Rear Pad Replacement: MKD154
- Parking Brake Provision: Yes
- Parking Brake Cables Included: Yes
- Minimum Required Wheel Diameter: 15"
- Front Spindles Included: No
- Ride Height: Stock
- Brake Booster Included: Yes
- Master Cylinder Included: Yes
- Brake Hoses Included: Yes
- Brake Hose Material: Stainless Steel Braided
- Master Cylinder Material: Cast Iron
- Master Cylinder Bail Type: Dual Bail
- Master Cylinder Finish: Natural
- Proportioning Valve Type: Disc/ Disc
- Proportioning Valve Location: Left
- Booster Bracket Finish: Zinc
- Brake Booster Type: Vaccuum
- Brake Booster Diameter: 8" Dual Diaphragm
- Brake Booster Material: Steel
- Brake Booster Finish: Zinc
- Pedal Rod Included: Yes
- Mounting Bracket Included: Yes
- Application Notes: Disc/ Disc applications direct bolt on. No modifications needed. Must use 15" or larger disc brake rim. Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer. 2.786" max register axle. Using original drum spindle.