Filters

Secure Checkout
Carolina Classic Trucks
Supply chain issues may cause delays. Click for details.
Serving the American People Since 2002
Your Shopping Cart Is Empty

Secure Checkout

SKU: 3298 8" Drop EZ HD 'Heavy Duty' Hitch, 2" x 2-5/16" Combo Ball 10K/14K GTWR 3298


8" Drop EZ HD 'Heavy Duty' Hitch, 2" x 2-5/16" Combo Ball 10K/14K GTWR 3298
Purchase 8" Drop EZ HD 'Heavy Duty' Hitch, 2" x 2-5/16" Combo Ball 10K/14K GTWR 3298
  • SKU: 3298 8" Drop EZ HD 'Heavy Duty' Hitch, 2" x 2-5/16" Combo Ball 10K/14K GTWR 3298

  • $199.99

  • Manufacturer: Andersen
  • Part #: 3298
  • Rating:
    Not yet rated

Description

The Andersen heavy duty hitches tow up to 14,000 lbs with the safety and convenience of the adjustable 8" drop and 8" rise on the EZ Hitch ball mount system. Turn the ball mount over to select a drop or rise. After the ball mount has been installed on your vehicle, just pull the included pin to adjust the combo ball up or down or to flip the combo ball between the 2" or 2-5/16" hitch ball as needed. Replace the pin, and you're ready to tow. The ball mount fits 2" square trailer hitches and is a great solution for those who tow several different trailers. Keeping your trailer level with your tow vehicle makes it easier and safer to tow. If your trailer is more than 2" nose up, it will sway during towing - increasing tire wear and making your ride less comfortable. Lots of sway makes it harder to drive your vehicle. If the trailer is more than 2" nose down, the load may put too much weight on the hitch and tow vehicle, exceeding the weight limit for both. This puts too much stress on the connection between your trailer and hitch and doesn't leave enough weight on your front wheels, affecting your ability to steer and brake properly. An adjustable ball mount system makes it easy to keep whatever you tow as level as possible.

Features:
  • 8" Drop, 8" Rise.
  • Towing capacity: 10,000 lbs with 2" ball, 14,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight)
  • Quickly adjust height: Pull pins, adjust, slip pins back into place - done!
  • Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #3800).
  • Meets V5 and SAE J684 certifications.
  • Made in the USA.

Customer Reviews

Average Not yet rated

Write an online review and share your thoughts with others.


There are no reviews